Altronix ACM8 Access Power Controller
Altronix
$96.00
Call (817)864-1089 for Availability
(No reviews yet)
Write a Review
Altronix
Altronix ACM8 Access Power Controller
- Input
- 12 to 24 volt AC or DC operation (setting not required), (0.6A @ 12volt, 0.3A @ 24 volt current consumption with all relays energized).
- Main fuse is rated at 10A.
- Power supply input options:
- a) One (1) common power input (board and lock power).
- b) Two (2) isolated power inputs (one (1) for board power and one (1) for lock/accessory power).
- Eight (8) Access Control System trigger inputs:
- a) Eight (8) normally open (NO) inputs.
- b) Eight (8) open collector sink inputs.
- c) Any combination of the above.
- Output
- Eight (8) independently controlled 2.5A outputs:
- a) Eight (8) Fail-Safe and/or Fail-Secure power outputs.
- b) Eight (8) dry form "C" 5A rated relay outputs
- c) Any combination of the above
- Eight (8) auxiliary power outputs (unswitched).
- Output ratings:
- Fuses are rated 3.5A each.
- Note: Total output current is determined by the power supply, not to exceed a maximum of 10A total.
- Features
- Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the eight (8) outputs.
- Fire Alarm disconnect input options:
- a) Normally open (NO) or normally closed (NC) dry contact input.
- b) Polarity reversal input from FACP signaling circuit.
- FACP output relay (form "C" contact rated @ 1A 28VDC not evaluated by UL).
- Removable terminal blocks facilitate ease of installation.
- Visual Indicators
- Red LEDs indicate outputs are triggered (relays energized).
- Green LED indicates FACP disconnect is triggered.
Storage: - 20° C to 70° C ( - 4° F to 158° F).
Relative Humidity 85% +/- 5%.
BTU/Hr (approx.): 4 BTU/Hr.
